Skip to main content
FREE Delivery!|(719) 781-8522
Bulk Gravel and Stone Delivery in Park County, CO

Bulk Gravel and Stone Delivery in Park County, CO

Colorado Rock Supply handles gravel, stone and aggregate delivery in Park County, Colorado. The most common order we place is for Class 6 road base, which is the standard base for driveways and pads here. The ground moves with moisture, so a proper base matters. We deliver by the ton, right to your site.

Materials Delivered in Park County

We stock the materials used most across the county. Each one has a specific job. Here is a look at the common choices and what they do.

Class 6 road base deserves more detail. For most home and small commercial jobs in Park County, Class 6 is the right call.

Ground Conditions Across Park County

The ground here shapes every project. Expansive bentonite clay is common along the Front Range and moves with moisture, so base depth and drainage matter more than in stable soils. A thicker base and good drainage prevent shifting and cracking.

Spring snowmelt and short, intense summer thunderstorms drive most drainage problems. Runoff on slopes and in drainage swales after snowmelt and monsoon-season storms is the main erosion driver. Rip rap and cobble are used to armor the bank and slow the water.

Timing matters too. Base and drainage work runs best from late spring through fall. Frozen ground and snowpack limit compaction in winter at altitude. Also plan for repeated freeze-thaw cycling, often several cycles in a single week at altitude. Frost depth runs about 30 to 36 inches in much of the state.

Delivery Across Park County

We deliver bulk material to Alma, Bailey, Como, Fairplay, Grant, Guffey, Hartsel, Jefferson, Lake George, and Shawnee. Ordering online is simple. You size your load by the ton or the yard, and we bring it to your site on a dump truck.

A bulk delivery is straightforward. We drop the material where you need it, and you spread it. Lead times are typical for the area, so plan your project around the working season. We do not quote exact day counts, but we work with your schedule to get the material to you when the ground is ready.

Choosing the Right Material

The right base or drainage stone depends on where you are in Colorado. Ground conditions shift from one region to the next. Compare a few places to see how the choice changes.

Phillips County sits on the Eastern Plains, where soils are sandy and stable. There, a thinner base under a driveway works because the ground does not heave. In Pitkin County, up in the High Country, freeze-thaw is constant and the soil holds moisture. That calls for a deeper base and more drainage stone. Prowers County, also on the Eastern Plains, has stable, sandy ground similar to Phillips, so the base design is lighter.

In Park County, you are in the High Country with expansive clay. That means your base and drainage choices should lean toward the Pitkin model: deeper, better drained, and built to handle movement.

Order Bulk Material for Your Park County Project

From Class 6 road base for a new drive to drain rock for a French drain, we deliver the right material for your site. We cover all of Park County, including Fairplay, Bailey, and Hartsel. Check the product pages above, then place your order online for delivery to your property.

Towns we deliver to in Park County

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Park County

What is Class 6 road base and what is it used for in Park County?

Class 6 road base is a crushed aggregate with fines that compact into a firm, stable surface. The angular rock locks together under compaction, which keeps the surface from shifting on the clay-heavy ground common here.

How deep should a gravel driveway base be in Park County?

For a driveway that will carry cars and light trucks, plan on 4 to 6 inches of compacted Class 6 road base. The expansive bentonite clay in the area moves with moisture, so a deeper base helps prevent rutting and frost heave. If you park heavy equipment on the drive, go closer to 6 inches and consider a layer of Class 5 for extra strength.

How much gravel do I need for my project?

Measure the length and width of the area in feet, then multiply by the depth in feet. Divide that number by 27 to get cubic yards. A 10 by 20 foot area at 4 inches deep is about 2.5 cubic yards. You can order by the ton or the yard. Call us with your measurements and we will help you confirm the load size.